LMI Technologies Gocator 2100 Series Скачать руководство пользователя

Страница: 161 / 523

Gocator Line Profile Sensors - User Manual

Gocator Web Interface • Measurement • 161

Removing a Tool

Removing a tool removes all of its associated measurements.

To remove a tool:

Go to the

Scan

page by clicking on the

Scan

icon.

Choose Profile or Surface mode in the

Scan Mode

panel.

If is not selected, tools will not be available in the

Measure

panel.

Go to the

Measure

page by clicking on the

Measure

icon.

In the tool list, click on the

button of the tool you want to delete.

The tool will be removed from the tool list.

Profile Measurement

This section describes the profile measurement tools available in Gocator sensors.

When Gocator is in Surface

mode

and you have defined a

section

, a Stream option displays in Profile

tools.

The following tools are available when

Uniform Spacing

is disabled:

For more information on the

Uniform Spacing

setting and resampled data, see

Uniform Spacing (Data

Resampling)

on page 50.

Profile measurement tools can be used on sections. For more information on sections, see

Sections

page 144.

Feature Points

Most measurements detect and compare

feature points

lines

found within laser profile data.

Measurement

values

are compared against minimum and maximum thresholds to yield

decisions

The following types of points can be identified.

Point Type

Examples

Max Z

Finds the point with the maximum Z value in the region of

interest.

Содержание Gocator 2100 Series












































































































































































































































































































































































































































































































































Результаты поиска

Содержание Gocator 2100 Series

Отзывы:

Похожие инструкции для Gocator 2100 Series

Бренды по названию

Популярные бренды

LMI Technologies Gocator 2100 Series, Руководство пользователя

Результаты поиска

Содержание Gocator 2100 Series

Отзывы:

Похожие инструкции для Gocator 2100 Series

Бренды по названию

Популярные бренды