MIUM0018_REV05_ HRH&HRS
_20170206-MIUM-
4.5 Installation and coupling of
•
The external sections are direc
air panel for CCS/CDX, by both
brackets for ceiling mounting o
figg. 3, 3a and 3b) for floor mou
•
Sections are already equipped
coupled to free stirrups to be m
10
).
This operation must be c
•
Previously apply the gasket (su
the basic unit (
fig. 10
)
•
For horizontal version section,
bracket; always interpose vibra
•
For vertical version section, fix
an antivibration layer (fig. 9); if
•
In case of roof cover, unit sid
M6 screw & washer
Self-drilling screw
Stirrup to be mounted
Gasket
H
H
-ENG
of external sections CCS/CDX/PLM
ectly coupled to the basic unit by air intakes & outlets p
oth panels for PLM, depending on PLM purpose); these
or support feet (supplied apart and to be mounted as
ounting.
Their weight shall not load the unit
.
ed with a series of perimetric L stirrups with built-in M
mounted on the unit in symmetrical positions, by using
carried out before installing the unit
.
supplied apart to be mounted) on the side of the extern
, use M8 threaded bars (or similar) crossing each supp
ration dampers between section bracket and bars (fig. 8
fix the supporting feet to the floor (or to the supporting
if adjacent to a vertical wall, it is also suggested to block
ide on which is installed will be free of coupling stirr
Sti
M6
F
HRH
HRS
CCS
CDX
PLM
15
ENG
panels (by supply air/return
e sections are provided with
s shown in the sequence of
M6 insert; they have to be
g self-drilling screws kit (
fig.
rnal section to be coupled to
pporting point of the section
8).
g framework), by interposing
ck the upper bracket on it.
irrups
.
tirrup with built-in
6 insert
Fig. 10
