LM Technologies LM959, Руководство пользователя, Страница: 3 / 11

2 Charging the Bracelet
2.1 Plug the small adaptor into the bracelet and then turn
on the AC mains at the wall.
2.2 Charging time
Normally, the bracelet battery will be fully charged
after about 2 hours. When the battery is full the
bracelet will stop charge automatically.
Then, hold the “power on/off” button for 2 seconds to
turn on the bracelet. (Please refer to the picture for
the button
2.3. Charging indicator
When the bracelet is charged, red LED light on. Once
the battery is full , then the LED will turn off
automatically.
2.4 Standby Time
When the battery is full the standby time is 100 hours.
2.5 Low Battery
when the bracelet is on and the battery becomes low,
the red LED will blink every 1 minute. At that time,
please recharge the battery as per the above steps.