device, only software or operating procedure shall be placed in the end-user operating manual of final products.
Note 3:
Additional testing and certification may be necessary when multiple modules are used.
Note 4:
The module may be operated only with the antenna with which it is authorized. Any antenna that is of the
same type and of equal or less directional gain as an antenna that is authorized with the intentional radiator may be
marketed with, and used with, that intentional radiator.
Note 5:
To ensure compliance with all non-transmitter functions the host manufacturer is responsible for ensuring
compliance with the module(s) installed and fully operational. For example, if a host was previously authorized as
an unintentional radiator under the Declaration of Conformity procedure without a transmitter certified module
and a module is added, the host manufacturer is responsible for ensuring that the after the module is installed and
operational the host continues to be compliant with the Part 15B unintentional radiator requirements. Since this
may depend on the details of how the module is integrated with the host, LM Technologies Ltd. shall provide
guidance to the host manufacturer for compliance with the Part 15B requirements.
Note 6:
FCC ID label on the final system must be labeled with “Contains FCC ID: VVXLM821-04XX” or
“Contains transmitter module FCC ID: VVXLM821-04XX”.
