27
8.
How to disassemble the lock
9.
Install the lock body
Take the front handle and the rear handle from the packaging.
Remove the two screws on the battery cover to open the battery compartment.
Disconnect the connecting cable taking care not to break it.
Remove the two shortening screws for the connecting column and remove the rear handle.
Disassemble the lock body taking care not to tear the connecting cable.
1
2
3
4
5
A.
Adjust the size of the lock body according to the location
of the hole i n the door. (60 mm or 70 mm).
B.
Check the opening direction of the door.
C
. Choose the latch position according to the opening direction of your door.
Left inside
Left outside
Inside
Inside
Outside
Outside
Inside
Inside
Outside
Outside
Right
inside
Right
outside
Note:
To verify if the direction of your door is left or right, look at it from the outside. If the hinges are on
the left side, the door direction is to the left, and vice versa.
Left
inside
Right
outside
Left
outside
Right
inside