Lloyd LI1088AS, Инструкция по эксплуатации

Страница: 10 / 11

3. When the soleplate reaches its adjusted temperature, the indicated light
turns off, then you can start ironing.
4. Use the steam burst function to recover the elasticity of the fabric. Rub
and press the polished cloth, then it will come back. If burst steam to
the opposite side of the cloth at the same time, the effect will be better.
5. Do not put the ironed clothes into wardrobe immediately. Hang the
clothes to clothes rack till it is cold.
6. After ironing, pour out the rest water . If some
water left in the water tank, put the plug into the socket for dry ironing
for a while. You can pull the plug out till you make sure no water in it.
7. Keep the iron upright. And the life of the iron can be longer.
Troubleshooting
Water tank Temperature
adjusting knob Steam bore power
supply Heating body
power
No steam
* * * *
Little steam
* * *
Can not heat up
* *
Cloth burnt and
shrink
*
Water drop from the
steam bore
*
water tank
without
water Temperature
adjusting knob
in the correct
position or not,
choose a right
temperature, Clean out
dirts from
steam bore
check the
indicator light
is working or
not, and
power supply
correctly
Check if the
indicator light is
on
Inspection
part
Failure