9
2/. Mounting on the dry wall
1. Use the TAPE MEASURE to decide how high you'd like to hang the Speaker Bar
on the wall. The SOUND Bar must be hung within 5 feet of an AC power outlet for
the attached AC power cord to reach.
2. Mark the position of the mounting screws on the wall using a pencil.
3. Line the LEVEL up on both of your mark sure they are level. If they're not, adjust
the marks as needed to make them level.
4. Drill a hole by a powerful electric drill.
5. Use a hammer gently nail 2 plastic tubs into the holes.
6. Drill through the EVA with screws directly into the holes.
7. Use the LEVEL to check that the mounting screws are level.
8. Put the SOUND Bar onto the mounting brackets, and make sure there is a firm
and stable connection before letting go of the Sound Bar.
9. Finally, use the LEVEL to confirm that the Sound Bar is level.
You should use
2 pieces of short screws
2 pieces of plastic tubes