Lloyd L24ND, Быстрая настройка, Страница: 5 / 5

5
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Be sure to match the (+) and ( - ) ends of the batteries with the (+)
and ( - ) ends indicated in the battery compartment.
3. Close the battery compartment cover.
1
Gently lift up
Change the batteries
2
Insert the batteries
3
Gently push down
NOTES
1. Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire.
2. Do not mix battery types or combine used batteries with new ones.
3. Remove depleted batteries immediately to prevent battery acid from leaking into the battery
compartment.
4. If you do not intend to use the remote control for a long time, remove the batteries.
5. Batteries should not be exposed to excessive heat, such as sunshine, heat registers, or fire.
6. Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth.
If chemicals touch your skin, wash immediately.
6
Features, appearance and specifications are subject to change without notice.
NOTE
Dimension
With Stand
Width: 557 mm
Height: 381 mm
Depth: 160 mm
Width: 557 mm
Height: 344 mm
Depth: 47 mm
Without Stand
Weight
NET 4.3 kg
GROSS
LED Panel Minimum size
(diagonal)
23.6 inches
Screen resolution
1366 × 768
Audio power 2.5 W + 2.5 W
Power consumption 35 W
Power supply
USB supply
100-240 V ~ 50 / 60 Hz
DC 5V, Max 500 mA
Receiving
systems
Analog
PAL SECAM
Environmental conditions
Temperature: 5°C~ 45°C
Humidity: 20%-80% RH
Atmospheric pressure: 86 kPa - 106kPa
5.3 kg
Attention Excessive sound pressure from earphones and headphones can cause hearing loss.
Disposal of this unit
Product should not be damaged, dismantled or thrown in municipal waste. It should be packed and
handed over to authorised re-cycler.