2
EN.33.C.140.1401
Room Temperature Regulation | Quick Guide - Programming wireless thermostat
Press
Mode
on the thermostat until the ”checkmark” is
shown in the display.
Check that the selected channels are shown in the
display. Confirm with
Mode
. The thermostat switches to
normal view.
Complete the programming by pressing the L-key where-
upon the L-LED goes out.
The thermostat shows
RUR
.
The receiver unit´s L-LED switches to yellow and selec-
table channels light up green. Select channel by pressing
desired channel key. The selected channel flashes green.
Repeat steps 5-10 for the other thermostats in the facility.
The programming of the thermostats is now completed. For a more detailed as-
sembly instruction, see supplied instructions or www.lksystems.se.