Liyu Lyric XF1808, Руководство пользователя

Страница: 28 / 30

- - 28
the valves (about 3~5 circles anti-clockwise) to return ink supplying.
(1.7) Repeat step (1.2), (1.3) and clean up the remained flushing solution in
head till the solvent ink jet out, now return printing.
(1.8) If head very terrible clogged, you must stop printing and power off.
Take down the head along with bracket and soak the nozzle plate into
the flush solution for several hours then re-install it.
(1.9) If above measures are all invalid, please contact with the local dealer
at once.
2. Maintenance
(2.1) After power off, move the carriage to the left end then do purging
followed as above step (1.5).
(2.2)Screw on 4 sealed caps but not tightened, and put the nozzle-pad plate
into the right cover.
(2.3) Move the carriage to the right end just above the nozzle-pad and make
them well sealed, thus good head protection can be realized.
( Note : Be take out the pad plate when printing in case of the picture quality
affected.)
3. Please keep the guide clean
Please in time infuse the lube into the slipper nozzle to keep the guide
smooth, the frequency decided by your working volume.