8
3.
Match successfully, which mean the first scanner work under
networking; it is “one to one mode”.
4.
Matching the second receiver,
(1)
Pull out the second receiver’s USB line from PC, please make sure
the USB line and receiver connect well, and receiver’s antenna is
connected well too.
(2)
Scanner read the barcode on this manual, “one to two pairing”
barcode (please see the barcode for common function setting on this
manual.)
(3)
After scanning, connect the receiver’s USB line to PC within 5
seconds.
(4)
If scanner buzzer “Di-Di-Di” three ticking sounds, which mean
matching successfully; if scanner buzzer “Di-Di-Di-Di-Di-Di” six
ticking sounds, which mean failure.
(5)
If match successfully, “one to two mode” networking setting
successfully.
(6)
If fail to match, please repeat above step (1), (2), (3) to reset.
Part Eleven: Barcode For Common Function Setting
One on One pairing, after
scanning this command, the
original
matching
mode
is
unusable;
scanner
will
do
according to new matching mode.
H Y C O C M D -
M G
One to Two pairing”, for setting
one to two mode, when setting
the second receiver, please scan
this command.
H Y C O C M D -
M G A
20 seconds without any scanning
auto off: for setting scanner auto
shutdown time.
H Y C O C M D -
S 2 0
Содержание D90E series
Страница 1: ...User s Manual Wireless Barcode Scanner ...