M985041 (3/20)
- 4 -
3
3
2
1
4
REPLACE OR INSTALL FILTER
• Remove plastic wrap from FILTER
(2)
. Remove FILTER LABEL
(5)
. Minor particles found outside the filter are normal.
Rinse the filter.
• Unthread Filter Cover
(1)
from Filter Housing
(3)
.
• Replace or install Filter
(2)
. The Filter is a snap fit onto Filter Cover
(1)
and can be installed by pushing or removed by pulling.
NOTE:
Filter orientation must be maintained as in
Figure A
. O-rings on FILTER
(2)
face away from
FILTER COVER
(1)
.
• Thread Filter Cover
(1)
onto Filter Housing
(3)
. To ensure American Standard Logo
(4)
is upright after threading,
begin threading with the Logo
(4)
upsided down. Alternatively, the CIRCULAR MARKING
(6)
on the filter cap should be
aligned with the matching CIRCULAR MARKING
(7)
on the filter housing before threading as in
Figure B
.
• Allow cold water to run through the new filter to flush the system fo 1 minute.
NOTE:
Filter life is approximately 4 months. Based on a usage of a hosehold of 4 showering once per day for 6 minutes per
shower. Total capacity is 5000 gallons.
7
6
FIGURE B
FIGURE A
2
5
1
