Rico Buggy edition 1
page 21
13.9
Adjusting the height and the angle of the footrest
In order to adjust the height of the footrest Fig. 23 loosen the knobs (1), set the desired height and then retighten the knob
(1). The adjustment of the angle of the platform is done by loosening the nuts (2) and setting the blockade (3) of the platform's
angle to reach the proper position of the footrest. Retighten the nuts (2) to secure the position of the platform.
Fig. 23
13.10
Adjusting and disassembling the safety barrier
In order to adjust the position of the safety barrier (2) press the buttons (1) of the angle adjustor on both sides of the seat
Fig. 24. Set the desired position of the safety barrier. To secure the safety barrier in its position release the buttons and move the
barrier up and down, until you hear a characteristic click sound.
Fig. 24
It is possible to remove the safety barrier Fig. 25. Press the button (2) of the angle regulator and pull out the barrier from
the adjustment slot.
