LIW LORI Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 21

LIW LORI Скачать руководство пользователя страница 12

page 12

LORI Stander edition 2

Foot platforms

The foot platforms used in the stander are fully adjustable in three planes. The tilt angle of the platform is also adjustable. In

order to ensure the most precise adjustment to the patient's needs, each platform is adjusted separately.

CAUTION!

After each adjustment of the foot platform, make sure that all adjustment

screws are securely tightened. Unscrewed elements may cause the adjustable elements
to shift automatically, which may result in injury to the patient.

7.8.1.

Adjustment of height and tilt of foot platforms - Figure 12

The foot platforms used in the stander enable full adjustment of the patient's foot position. To adjust the height and angle of

the foot platform, loosen the screws (2). Then move the platform support (1) along the guide of the stander column. Once the
desired position is reached, lock the platform position by tightening the screws (2).

Figure 12

7.8.2.

Adjusting the spacing and inclination of the foot platforms

The horizontal position of the foot platform and its tilt can be adjusted after loosening the screws (2). The adjustment allows

the foot platform to be moved along the support (1). After completing the adjustment of the platform position, tighten the screws
(2). To adjust the right and left platform spacing equally, pay attention to the ruler (1). The indicator (3) must show the same values
on the ruler on the right and left.

Figure 13

«
...
10
11
12
13
14
...
»

Содержание LORI






















Отзывы:

Нет отзывов