LIW Baffin.1, Руководство пользователя, Страница: 24 / 62

Baffin.1 Edition 5 23
5.6.1 Preparation for use – rotating platform – Fig. 40
Loose the screw (unscrew it) (1) next unbolt the pin (2) next pull forward
and adjust the depth of the ISOFIX rigid attachments. Adjust it to the size of a
car seat and to the position of the ISOFIX anchorages in the vehicle. Rotating
platform should be placed very closely to the backrest of a rear car seat.
Finally, bolt the pin (2). - pin is correctly bolted if you can listen audible
CLICK. Next, lock the screw (1).
Fig. 40
5.6.2 Installation of a rotating platform in a vehicle
If you completed point 5.6.1. then lay the rotating platform onto the
vehicle‘s seat. Guide the ISOFIX connectors (Fig. 40 p. 4) (with red release
buttons) into the vehicle‘s I SOFIX anchorages (fixtures). Check that the
connectors have locked into place safely by pulling. CORRECT connection is
signalled by GREEN colour on release button (Fig. 41)