User manual
3
Bluetooth Pairing
With de device turned on, it comes to pairing mode, a sound is ringing and the LED light is flashing.
Open the Bluetooth® settings of your phone, tablet or other Bluetooth enabled audio device and select
“TES218”. After the pairing is successful, a sound is ringing and the LED light stays on.
Charging function (Battery charger)
Connect the USB part of your charging cable (not supplied) to the speaker, then the end of the cable to
your phone or tablet, to charge it
Playing Music
Press the Play / Pause button to start or pause the music.
Click on the top button
to play previous song or long press to increase the volume
Long press the bottom button
to go to next song or long press to decrease the volume.
Radio Mode
Press the two
buttons at the same time to enter Radio Mode. Plug in the USB Cable to use as an
antenna at FM mode.
Press play button, to search available station automatically.
Short press
key to control the channels.
Press the two
buttons to switch back to Bluetooth® mode.
Remote selfie timer function
Open the camera on your device. Press 2 times the play button to take a picture.
U disk card Playing
Play music directly when insert in the U disk card. Supports formats : WAV/WMA/MP3,ect.
Hands-free for Calling
Pick up or hang up a call by short pressing the play button.
AUX (Line in) mode
Connect the 3.5mm audio line with the device on one side and the other one to the speaker. Then
You can play the music.
