Livoo TEC616, Руководство пользователя

Страница: 18 / 69

User manual
17
3. Why can’t take a hot bath with the smart bracelet?
Answer: the bath water has a relatively high temperature, and generates a lot of vapor which is the gas phase
with small molecular radius and can easily infiltrate into smart bracelet from the shell gap. When the
temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the
short circuit inside the smart bracelet and damage the circuit board and then damage the smart bracelet.
4. Why is the Bluetooth connecting icon blinking all the time? Answer: User may encounter this problem. It
mainly can prompt the users that the pushed message is not received if APP is not connected with bracelet.
Launch APP to connect to bracelet and the Bluetooth icon can be displayed normally.
Note: For more frequently asked questions, please refer to the JYouPro APP User Manual.
PRECAUTIONS
1. Do not use an adapter with a current over 2A. Charging time is around 2~3 hours
2. Do not charge after the device was water damaged
3. This is an electronic monitoring product, data received from it cannot be used as medical basis.
4. Blood pressure testing tip
：
a) Keep your body relaxed and still while testing.
b) Keep device at the same height as your heart, and don’t talk while you are testing.
Warning
: this product is not a medical device. The Smart band and its applications should not be used in
diagnosis, treatment for as a preventive treatment for diseases and sickness. Please consult medical
professionals before changing exercise habit or sleep habit to avoid serious injuries. The manufacturer
reserves the right to modify and improve any functions description in this user guide and continuous update
of the new content without further notice. This user guide is for reference only, the smart band for selling is
subject to the final product.
EU DECLARATION OF CONFORMITY
We
DELTA
BP61071
67452 Mundolsheim – France
Herewith declare under our sole responsibility, that the radio equipment
Smartwatch
TEC616 (Frequency range
2402MHz~2480MHz
)
Fulfils the essential requirements of the Directive 2014/53/UE
The following standards were applied:
Radio:
ETSI EN 300 328 V2.2.3 (2019-07)