Livoo TEA249 Скачать руководство пользователя страница 3

 

User manual 

 

 

INSTRUCTIONS FOR USE 

 

Connect one end of the USB-C cable (included) to the USB-C port of the charger, and the other end of the cable to 
the USB charging port or cigarette lighter socket inside your car. The Red LED indicator will light on. 

 

Install the car mount holder on the air vent. 

 

Then,  place  your  phone  on  the  charger:  slide  down  the  cell  phone  along  the  holder,  the  clamps  will  close 
automatically, and push the phone downward until the clamps lock and provide a stable hold. 

 

Wireless charging of the phone will start immediately, with Blue indicator light on.  

 

When your phone is fully charged, the device will automatically power off. 

 

Remove your phone from the charger after fully recharging, by pushing the phone downward to unlock the clamps, 
which will automatically open and release your phone. 

WARNING: 
Under the locking status, the phone is not allowed to be unlocked by force by pushing hard on the holder, 
otherwise the automatic lock switch inside product will be damaged. 
 

IMPORTANT: Some phone cases do not support Wireless Charging due to their thickness and design. If your 
Phone model is compatible with Wireless Charging and you’re unable to charge it wirelessly, please remove 
your phone case and retry. 

 

Care and Maintenance 

Read the following recommendations before using the product. Following these you will be able to enjoy 
the product for many years. 

 

Do not expose the device to liquid, moisture or humidity to avoid the product’s internal circuit being 
affected. 

 

Don’t use abrasive cleaning solvents to clean the device. 

 

Do not expose the device to extremely high or low temperature as this will shorten the life of electronic 
devices, destroy the battery or distort certain plastic parts. 

 

Don’t dispose of the device in a fire as it will result in an explosion. 

 

Don’t expose the device to contact with sharp objects as this will cause scratches and damage. 

 

Don’t let the device fall on the floor. The internal circuit might get damaged. 

 

Don’t attempt to disassemble the device as it may get damaged if you are not professional. 

 

 

 

 

 

 

 

Отзывы: