Instruction Manual
USING YOUR APPLIANCE
Installing the gas cylinder
Unscrew the gasket and cap from the gas cartridge and carefully
insert it into the opening below the appliance. Do not let the
cartridge fall into the location. When it has reached the end,
start screwing the cylinder clockwise until it is secure. Do not
screw it in too tightly, as this may damage the threads that hold
the gas cylinder in place.
If you need to replace the gas cylinder, lay the appliance on its side
with the knob facing up and unscrew it counter-clockwise. Then
carefully remove it from the appliance.
Operation
Rinse thoroughly the bottle with warm water before using it for the first time.
Fill the bottle with tap water or filtered water respecting maximum level mark.
Screw on the bottle and make sure the bottle is secured properly.
Press the gasification button until you hear a sound from the valve (roughly 1 second). Do not press more
than 1 second on the gasification button.
Release the button. The residual pressure in the bottle is released (slight noise). Now unscrew the bottle.
The degree of gasification depends on many factors (water temperature, remaining amount of gas in the
cartridge).
You can adjust the degree of gasification by repeating the pressure without unscrewing the bottle :
•
One pressure: weakly carbonated water
•
Two pressures: medium carbonated water
•
Three pressures: highly carbonated water
