Instruction Manual
6
CLEANING AND MAINTENANCE
Warning: before clean and maintain this appliance, do turn it off and pull out the plug. Make sure it is
powered off to avoid electric shock!
1.Clean oscillating plate (see the red arrow on the picture on
right side):
•
Take out water tank of humidifier.
•
Pour out residual water in the water sink
•
Use clean brush to clean oscillating plate. Do not use
household cleaners to clean oscillating plate which will
affect its lifetime.
2.Clean outer appearance of humidifier:
•
Power off and pull out the plug
•
Wipe outside with soft, moist cloth
•
Do not make water flow into inside of machine. It may cause damage on your machine and
electric shock.
•
After cleaning, place this appliance in ventilating place to make it dry (do not expose to sun).
Only when machine is completely dry can you use it.
3. Descaling: Depending on water hardness, generally, the descaling should be done weekly or
every other week to optimize unit performance
TROUBLESHOOTING GUIDE
PROBLEM
SOLUTION
Water vapor and
humidity are not
produced.
Power plug: Unplug and then try again.
Power Failure: When the power is returned, try again.
Tank Installation: Make sure the tank is correctly attached.
Check if floating ball is assembled in proper place
Air blows but water
vapor is not
produced.
Excessive Water: Remove a certain amount of water from the tank.
The humidity has a
bad smell.
Poor maintenance or dirty water: Clean the product thoroughly, and fil it with
fresh water.
Unit has stopped
working.
No or low water. Unplug unit and refill tank.
