Instruction Manual
9
Remove the transparent cover (2)
Place the bobbin into the slot, so that so that the thread round in a clockwise direction (3) (4).
Leave 10 cm tail of thread (5).
Here is a schema:
Hold the upper thread with the left hand. Turn the handwheel (6) towards you (counterclockwise) lowering, then
raising needle.
Gently pull on the upper thread to bring the bobbin thread up through the needle plate hole (7).
Lay both threads to the back under the presser foot (8).
Put on the transparent cover after the bobbin thread and upper thread pressed under the presser foot (9).
(1)
(2)
(3)
(4)