Instruction manual
6
To suck up :
1.
Remove the appliance from his recharge seat (9)
2.
Insert the accessory you need, brush or crevice (12). For the brush (13), it must be attach to the
crevice if you want to use it.
Note: the appliance can suck up crumbs without the terminal attachment too.
3.
Push the on/off switch (2)
4.
Guide the nozzle over the surface to be cleaned, check whether the maximum fill level on the
collecting container has been reached. If this is the case, it needs to be emptied (check below
paragraph).
Note: while the appliance is operating, keep the accessory turned downwards.
5.
Push the on/off switch down again to switch off the appliance and put back in charge if necessary.
Note: Do not suck up the following material:
-
Glowing ash, cigarette ends, matches
-
Very fine dust
-
Pointed, hard objects such as large shards of glass
To suck up water:
Warning:
•
Never use the appliance to suck up any other liquid than cold water.
•
Do not exceed the indicated MAX level when sucking up liquids (the MAX level must always be
measured when the appliance is in the vertical position, with the suction inlet facing down).
•
When sucking up water, always keep the appliance in the vertical position, with the suction inlet
facing downwards.
•
Never place the appliance in any other position and never allow water to come into contact with
the motor.
7
