
User manual
8
If the display shows “E rr” after you have pressed START/STOP, (see below figure 2)
the temperature sensor is disconnected please check the sensor carefully by
Authorized expert.
If the display shows“L LL”after pressing the Start/Stop button ( except the programs
BAKE), it means the temperature inside is too low
(
accompanied by 5 beep sounds
)
, stop sound by pressing the Start/Stop button, open the lid and let the machine
rest for 10 to 20 minutes to return to room temperature,or select the BAKE program
and make the temperature inside the chamber increase rapidly”
NOTE: The temperature in bread maker is lower than room temperature if placing bread
maker in cooler place (such as air conditioning room, cold storage) after a period of time
and then move it to normal room temperature immediately to make bread
.
BEFORE THE FIRST USE
Wash and dry bread pan and kneading paddle.
Do not use metal utensils in bread pan since they may damage the non-stick surface.
Check for any missing or damaged parts.
Clean all the parts according to “CLEANING AND MAINTENANCE”.
Set the bread maker on bake mode and bake empty for about 10 minutes. Then let it cool down and
clean all the detached parts again. The appliance may emit a little smoke and/or odor when you turn
it on for the first time. This is normal and will subside after the first or second use. Make sure the
appliance has sufficient ventilation.
Dry all parts thoroughly and assemble them, the appliance is ready for use.
CAUTION! Falling Object Hazard. Bread maker can wobble and walk during kneading cycle. Always position
it in the center of counter away from the edge.
INSTRUCTIONS FOR BAKING
1.
Place the pan in position, then turn it clockwise until they click in correct position. Fix the kneading
blade onto the drive shafts. Turn the kneaders clockwise until they click into place. It is recommended
to fill holes with heat-resisting margarine prior to placing the kneaders, this avoids the dough to stick
below the kneaders and the kneaders could be removed from bread easily.
2.
Place ingredients into the bread pan. Please keep to the order mentioned in the recipe. Usually the
water or liquid substance should be put firstly, then add sugar, salt and flour, always add yeast or
Image 1
Image 2
Image 3