26
Remember that if the designer or the installer checks the need to change the frequency of the checks,
reducing the time between them, he has the right to intervene with a specific note respectively in the
Roofing Technical Paper or in the Installation File. Livith recommends to always contact a qualified
technician or Livith SpA in case of extraordinary maintenance of the device.
Livith declines all responsibility due to the system reuse following a fall if a complete
maintenance operation has not been carried out.
The ordinary maintenance procedure for the fall arrest systems shown in this Manual is illustrated below:
DOCUMENTATION AVAILABLE
CHECKS TO BE CARRIED OUT
NON-RECOVERABLE DOCUMENTATION
CHECKS TO BE CARRIED OUT
MAINTENANCE PROCEDURES
MAINTENANCE PROCEDURES
DOCUMENTATION NOT AVAILABLE
OR PARTIALLY AVAILABLE
RETRIEVED
DOCUMENTATION
Clean and waterproof
the membrane
Replace damaged/deformed
components.
Ask for replacement labels
of marking
View and proceed following
the product maintenance sheet
that can be downloaded from
the website www.livith.it
or by contacting Livith S.p.A.
Con
tact
Livith S.
p.A.
C
Livith S.
p.A.
Contact
Livith S.
p.A.
Retrieve the work File (Roofing Technical Paper,
Installation File, User and Manteinance Manuals of all
devices)
Consult all documentation to know the
system and the specific maintenance
procedure
Visually inspect the devices and the
coverage parts where they are placed
Wear and presence of corrosion of device components
Abnormal deformations of the rope or of the device components
Deformation/integrity of the fall arrest indicator
Identifiability of components through the marking
Inspect the devices and all their
components with specific instruments
(e.g. torque wrench)
Revise and maintain the basic structures
and anchors as indicated in the
Installation Sheet and/or in the Roofing
Technical Paper.
Control the correct assembly of the system.
Verify the efficiency of possible moving parts.
Provide for adequate report of the
intervention carried out
Replacement of anchor devices
and new certification
Waterproofing in the housing area of the device
Presence of water infiltrations or dips due to possible stagnations
Presence of woodworms, molds and state
of cleanliness/degradation of the device area
Or access to
smart.livith.it
and use the
QRCODE SMART
to download the included documents
Trace back to the
installer/designer/producer using
the marking and the partial
documentation available
Con
tact
If the system has been registered with
SMART access to
smart.livith.it
frame the
QRCODE
and confirm the inspection of the system
Take note of the date of intervention on
the roof access plaque, in the "last
inspection date" space and indicate the
next scheduled maintenance date in the
"next inspection date" space
Release the documentation of the
maintenance carried out
in the appropriate spaces
of the Installation File
DOCUMENT COGNITIVE
PHASE
ADDITIONAL TIPS
PHASE OF VISUAL
INSPECTION OF THE SYSTEM
PHASE OF
INSTRUMENTAL / FUNCTIONAL
INSPECTION OF THE SYSTEM
DOCUMENTARY
FULFILMENTS
