Living Waters AuaRinse LWMMF10, Как использовать, Страница: 4 / 8

Page 4 of 8
GUIDE TO REPLACING MEDIA
1. Get a copy of the service manual for the appliance, read it,
and keep it handy.
2. If this is a first time installation skip to step to Step 15 below.
Otherwise go on to Step 3.
3. Turn off the water to the unit by using the bypass valve.
(LivingWaters™ units come with bypass valves that easily
attach to the control valve body using nuts that only require
hand tightening.) Place the unit in bypass by turning the red
arrows to where they point to each other. The unit is now in
bypass mode.
4. Disconnect the appliance from the bypass valve by turning the
nuts that attach the bypass valve to the appliance.
5. Manually set the appliance to backwash position (Manual
Regeneration) to relieve vessel pressure.