ASSEMBLY INSTRUCTIONS
Item No. : EGE-100
(1) Carefully remove all parts from box and remove
all plastic covering from lamp parts.
(2) Place the Lamp Base (A) on the table.
(3) Attach the Harp (B) on the Socket.
(4) Place the Shade (C) on the Harp (B) and tighten
it with the Finial (D).
Dear Customer,
Congratulations on your purchase of this quality lamp. It has been produced under the highest
quality standards. Please read carefully the following precautions before using this lamp:
When unpacking and assembling, be careful not to pull wire with full strength, as an incorrect
connection could result.
Only use the bulb and wattage specified in this instructions or on the label located on the
socket.
Do not attempt to replace bulb while the lamp is plugged into an electrical outlet.
Do not use outdoors, or near water or other liquids.
Unplug from outlet before removal of any parts and cleaning.
Only use soft cloth for cleaning. Do not use any chemical or abrasive cleaners.
Remove the cellophane cover from shade before use.
During shipment, the socket cover may have become loose. Before inserting bulb, check to see
that the socket cover is in place.
l
l
l
l
l
l
l
l
Made in China
CAUTION
:
IMPORTANT SAFETY
INSTRUCTIONS
This portable lamp has a polarized plug (one
blade is wider than the other) as a safety feature
to reduce the risk of electric shock. This plug will fit
in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician. Never
use with an extension cord unless the plug can be
fully inserted. Do not alter the plug.
Finial (D)
Shade (C)
Harp (B)
Lamp Base (A)
CAUTION: TOREDUCE RISK OFFIRE.
USE
MAX
OR USE
MAX
100-WATT3-WAYTYPE A
LAMP
29-WATT
SELF -BALLASTED LAMPOR LAMPADAPTER.
120V60Hz AC ONLYMADE INCHINA
3-WAY
SURYA
