SEDONA JUNIOR LOFT STORAGE BED
4136/4137/4492
PARTS LIST:
A)
28-4" Lag Bolts
B)
28-Black Steel Washers
C)
1 - 5 1/4” X 75
"
Bed Rail
D)
2 - End Assemblies
E)
2 –5 1/4" x 75" Mattress Rails w/Support Cleats
F)
4 –3 1/4" x 75" Guard Rails
G)
3 -3 1/2" x 38
3/4
" Mattress Supports
H)
10-1 1/4" Wood Screws
TOOLS REQUIRED:
1)
7/16" Wrench or Socket Wrench
2)
Phillips Head Screwdriver
Make sure you have all parts before beginning assembly. If you need a part, contact
Living Spaces
1)
Attach the one bed rail (C) to the bottom of the end assemblies (D) with 4 lag bolts and 4 washers, and tighten.
2)
Attach two mattress rails(E) and four guard rails(F) to the top of the end assemblies with 24 lag bolts and 24
washers, and tighten.
3)
Roll Twin Slat kit out in bed assembly stretching it from bed end to bed end. Secure with 4 wood screws on
the ends of the outermost slats, one in each corner of the bed. Center 3 individual slats in the 3 gaps built into
the slat kit and secure with 6 wood screws on the ends of each individual slat.
4)
Add mattress not to exceed 10" thick and sleep well!
Recommended: Electric driver with 7/16" socket
A FOUNDATION IS REQUIRED WITH 3 SLAT CONFIGURATION
