background image

MAS90:  5043-43325

4176 BH TRIPLE BUNK HARDWARE KIT

QTY:

DESCRIPTION:

40

1/4 X 4  HEX LAG BLK

40

3/16 USS FL WASHER BLK

30

6 X 1 1/4 PHIL FLAT PARTICLE BOARD SCREW

4

1/2 X 3 FLUTED DOWEL

7030-00425 KIT

Содержание 4176

Страница 1: ...MAS90 5043 43325 4176 BH TRIPLE BUNK HARDWARE KIT QTY DESCRIPTION 40 1 4 X 4 HEX LAG BLK 40 3 16 USS FL WASHER BLK 30 6 X 1 1 4 PHIL FLAT PARTICLE BOARD SCREW 4 1 2 X 3 FLUTED DOWEL 7030 00425 KIT ...

Страница 2: ...ch end of the two outermost slats One in each corner of the bed Center the three individual slats in the 3 built in gaps in the Slat Kit and secure with 6 wood screws at each end of the individual slats 4 Repeat step for the bottom bunk starting with the very bottom bed surface at the floor 5 Repeat step 3 for the middle bed surface 6 Place the 4 Wood Dowels in the holes of the bottom bunk assembl...

Страница 3: ...bstitute parts Contact manufacturer or dealer for replacement parts 10 Use of a night light may provide added safety precautions for a child using the upper bunk 11 If the bunk bed will be placed next to a wall the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall This applies only to bunk beds without two full lengt...

Страница 4: ...IVIDUAL SLATS Installation of individual slats for use with Bunkie Board Bunkie Board sold separately See your retailer for purchase of Bunkie Board SCREWS SCREWS SCREWS SCREWS SCREWS SCREWS INDIVIDUAL SLATS INDIVIDUAL SLATS INDIVIDUAL SLATS When used with a slat roll the three individual slats should be placed evenly in the gaps and underneath the strapping before fastening Individual Slat Indivi...

Отзывы: