Living Flame Thermoflow, Руководство по установке и эксплуатации

Страница: 10 / 50

Living Flame Thermoflow Fireplace Installation Instructions Page 10
Living Flame 2012
Owner
Operating Instructions
Electric On/Off Control Operation Option
-
Check gas supply is turned on
.
- Start Up.
- Make sure the room switch is in the off position and the pilot light is lit
according to your manual system.
- Set your manual control to the high flame setting.
- The room switch may now be used to turn the fire on and off as desired.
-
When the room switch is in the off position the pilot will remain alight
.
N
OTE :
If the gas line has been interrupted when first lighting the fire, it may be
necessary to follow the start up sequence several times.
High / Low Flame
Turn the control knob to light the main burner.
Small Flame Diagram is low.
Large Flame Diagram is high or anywhere in between as desired
Shut Off
Turn the control knob clockwise to either the pilot position so that only the
pilot remains alight or to the off position to extinguish the pilot light.
Safety Shut Off
The variable rotary control will automatically shut down should the pilot be
interrupted or the pilot fails to light.
N
OTE
:
If the system fails to light after several attempts, call for a registered Living
Flame Maintenance Engineer or Living Flame Auckland for your nearest
Registered Service Agent.