AFTER SALES SUPPORT
[email protected] or 0800 100 858
9
•
Screw the
LH Cabinet Drawer Slides
into the LH End using two Drawer Slide Screws for each
slide
(ensure that the end of the slide with the wheel is on the side with the finished edge)
.
•
Insert
two Large Cams
as shown (make sure the arrow on the top of the Cam points towards the
top edge of the End).
•
Push
two Dowels
into the top edge of the End.
•
Screw
three Connecting Bolts
into the holes as shown.
Connecting Bolt
Connecting Bolt
Large Cam
Drawer Slide Screw
Dowel
Cam
Drawer Slide Screw
Finished Edge
Connecting Bolt
STEP 4: Hardware LH End
