AFTER SALES SUPPORT
or 0800 100 858
8
•
Turn
the LH
End
with
the
Rails
and Toeboard
attached
onto its
back
edge.
•
Fit
the
RH
End
to
the
Rails
and
Toeboard as
shown
in
the
drawing
below.
•
Lock
the RH
End
to
the
Rails
and
Toeboard
by
tightening
all
the Cams in
the
Rails
and
Toeboards in
a
clockwise
direction.
•
Fit the
Top
to the
Ends
by fitting the four Connecting Bolts installed in the Top into the Cams in the
Ends. Tighten all four Cams to lock the
Top
to the
Ends.
•
Tap the four Nail on Glides into the bottom of the
Ends
as indicated below. Space them about
50mm in from the front and back edges.
STEP 6: Attach RH End
STEP 7: Attach Top and Glide Feet
RH End
LH End
Nail on Glides
Top
RH End
LH End
Nail on Glide
