MARKETED BY: The Warehouse, 26 The Warehouse Way, Northcote, Auckland 0627 - Phone: 0800 422274
Assembly:
1. Remove protective packaging from the lamp shades and fitting.
2. Install the recommended bulbs, taking care not to directly contact the glass bulb
surface (handle via a clean / dry and lint free cloth).
3. Gently screw the lamp shades (clock-wise) onto the lamp holder bodies. Ensure
shade is threaded all the way in, until the body makes direct contact with the
support.
WARNING
: Do not use excessive force to tighten the shades, these are
constructed from glass and can be broken if overtightened.
4. Place the lamp fitting on a stable / dry and level support surface.
5. Insert the supply cord plug into a suitable mains outlet and use the in-line cord
switch to operate.
