15
0800 422 274
NZ
WARNING!
• Never clean the unit with an abrasive, acid, oil or solvent based cleaning agent, or
with abrasive pads or scourers. Never use flammable fluids or sprays for cleaning
as the fumes from these substances can create a fire hazard or explosion.
• Never clean the appliance with a steam cleaner. Moisture could accumulate in
the electrical components, danger of electric shock! Hot vapours can lead to the
damage of plastic parts.
• The appliance must be completely dry before it is placed back into service.
IMPORTANT!
• Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the
juice form orange peel, butyric acid, or cleansers that contain acetic acid. Do not
allow such substances to come into contact with the appliance parts.
Other Useful Information (Cont.)
Replacing the interior light
This fridge comes with a 10W interior light bulb. When replacing it make sure to use
a bulb suitable for this purpose, of equivalent size and wattage and that the unit is
disconnected from the power supply.
• First, remove the water drip tray for easier access to the lamp cover.
• To remove the lamp cover, first unscrew the screw using a Phillips head screwdriver.
Then remove the plastic cover at the end of the thermostat enclosure by pushing
both ends of the cover and pulling forward. Allow the cover to remain hinged on the
rear side.
• Unscrew the light bulb, remove it and replace it with a new one of the same shape
and wattage.
• Push the cover back into place and secure it with the screw.
• Replace the water drip tray.
• Connect the unit to power and set the temperature control to the usual setting.
Fig.5
