Living & Co LOH19007W, Инструкция по эксплуатации

Страница: 4 / 8

outlet fitted with a residual current device
(
RCD
)
with a rated operating
23
.
NOTE
:
It is normal when the heaters are turned on for the first time, or
22
.
The cord shouldn’t be placed near the hot surfaces of the appliance
.
18
.
Be sure that no other appliances are in use on the same electrical
not let bare skin touch hot surfac es
.
If provided
,
use handles when
17
.
This heater is hot when in use
.
To avoid burns and personal injury
,
do
or a swimming pool. Never locate the heater where it may fall into
16
.
Don’t use this heater in the immediate surroundings of a bath
,
a shower
hot, arcing, or sparking parts inside the heater
.
flammable liquids are stored e
.
g
.
garages or workshops as there are
materials
,
surfaces or substances at least 1m from the front of the
bathtub or other water container
.
moving the product
.
circuit as your product as an overload can occur
.
19
.
This heater is filled with a precise quantity of special oil.
20
.
Repairs requiring opening of the oil container are only to be made by the
manufacturer or his service agent who should be contacted if there is
an oil leakage
.
21
.
Regulations concerning the disposal of oil when scrapping the
appliance have to be followed
.
when they are turned on after having not been used for a long period of
time,that the heaters may emit some smell and fumes
,
This will disappear when
the heater has been on a short while
.
24. Never operate the appliance with wet hands
25
.
For additional safety
,
it
'
s recommended that this heater is always used on an
residual current not exceeding 30mA
.
14
.
Do not place this heater near flammable materials
,
surfaces or
substances
,
as there may be a risk of fire
.
Keep the above flammable
product and keep them away from the sides and rear
.
15
.
Do not use the heater in any areas where petrol
,
paint or other
4