CLEANING
1.
Disconnect the power supply before cleaning.
2.
Empty the chopping jar, dismantle all detachable parts and rinse them in warm soapy water. Extreme
caution must be taken when handling blade as it is very sharp. All the accessories except motor base are
dishwasher safe components, but the temperature setting shall not exceed 70 . Then dry thoroughly.
3.
Wipe the outside of base with damp cloth.
Never immerse the motor base in water as electric shock is
possible to
occur
. Then dry thoroughly. Ensure the interlock area is free of food particles
FOR A QUICK WASH UP
Between processing tasks, pour in some water into the chopping jar, turn and hold
the speed selector to P position a few seconds for quick cleaning.
KNEADING/MIXING
1.
Firstly, see
Placement of chopping jar
on
page 6
2.
Insert the
plastic blade
into the driving shaft in the jar securely.
3.
Measure the flour with food pusher and put them into the jar. The maximum quantity of flour is 375g.
4.
Place the
lid
onto the jar (see
Placement of lid
instruction on
page 7
)
5.
Insert the food pusher into the feeding funnel.
6.
Add one tablespoon oil into the appliance from feeding funnel. Connect the appliance to power supply. Turn
the speed selector to the “2” setting.
7.
Then add water (the maximum water quantity is 225g) with food pusher from the feeding funnel slowly
within 20s.
NOTE: the food pusher also can be used as measuring cup for measuring oil or water.
8.
The proportion of the flour and water is 5:3. Make sure the quantity of the water shall not be more than the
maximum specified water quantity.
Note: Add some more water if the processing speed slows down during operating so as to
make the motor run smoothly, otherwise the motor may be damaged. During
kneading/mixing, to avoid shaking, press the lid with one hand, and the other hand is
holding the handle.
9.
Stop the process by turning the speed selector to “0” position as soon as the pastry starts to form a ball
CAUTION
: The total operation time is not more than 90 seconds. And minimum 2 minutes rest period must
be maintained after one operation cycle. At least 30 minutes rest period must be maintained to let the
appliance cool down after three operation cycles.
10.
Unplug the appliance, detach the cover, firstly remove the plastic blade, then remove the dough.
0800 422 274
NZ
Содержание LFP500W
Страница 1: ...L C FOOD PROCESSOR 500W INSTRUCTION MANUAL MODEL LFP500W 0800 422 274 NZ...
Страница 5: ...KNOW YOUR FOOD PROCESSOR 0800 422 274 NZ...
Страница 12: ...0800 422 274 NZ...
Страница 13: ...0800 422 274 NZ...
