Assembly:
1. Remove protective plastic overwrap from the lamp shade.
2. Remove the threaded plastic shade ring (retaining nut) from the lamp holder.
3. Install the lamp shade onto the lamp holder body.
4. Replace the threaded plastic shade ring (retaining nut) onto the lamp holder body
5. Install the recommended bulb.
6. Insert the supply cord plug into a suitable mains outlet and use the in-line cord
switch to operate.
Lampshade fitment:
MARKETED BY: The Warehouse, 26 The Warehouse Way, Northcote, Auckland 0627 - Phone: 0800 422274
