AFTER SALES SUPPORT
0800 824 556 [email protected]
09
NOTE:
This is useful for removing creases from hanging clothes, curtains etc.
NOTE:
The cool mist spray may cause water spotting on some fabrics. Ensure you do a
test patch on a hidden part of the fabric first.
Instructions (cont)
Burst of Steam
The burst of steam will work as long as there is water in the water tank and the temperature
control dial is set above the warm heat setting ( ). An additional burst of steam may be
used to subdue stubborn wrinkles. This function is especially convenient if you press heavy
fabrics such as denim.
1. Ensure you have filled the water tank.
2. Set the Steam Iron between the warm to hot heat setting (
).
3. The indicator light will illuminate whilst the Steam Iron is heating up. Once it has
reached the selected heat setting, the indicator light will go out and you can begin
ironing. Do not use the burst of steam function until the Steam Iron has reached the
selected heat setting and the indicator light is off.
4. Press the burst of steam button, you may need to press it 2-3 times to pump the water
through.
5. Leave the Steam Iron for 3 seconds between bursts to allow for the temperature of the
Steam Iron to recover.
NOTE:
Please remember that the burst of steam function should only be used when
the temperature control dial has been set above the warm heat setting ( ) and
has completely finished heating up (the indicator light will be on until the selected
temperature has been reached). If the burst of steam button is not used correctly, water
may leak out of the soleplate. This is normal and not a product defect.
Dry Ironing
No water is required when dry ironing, so there is no need to fill the water tank.
1. Move the steam control dial all the way to the no steam setting as shown in Fig. 1 (see
page 06).
2. Set the temperature control dial to your desired heat setting.
3. The indicator light will illuminate whilst the Steam Iron is heating up. Once it has
reached the selected heat setting, the indicator light will go out and you can begin
ironing.
Vertical Steam
You can also use the burst of steam function for vertical steaming. Hold the iron in a vertical
position and press the burst of steam button. You may need to press it 2-3 times to pump
the water through.
