Living & Co CM5018D-GS, Инструкция по эксплуатации

Страница: 7 / 16

INSERTING THE FILTER INTO THE PORTAFILTER
1. To insert the selected filter (two cup or one cup) in the portafilter, make sure to align the notch
on the filter with the groove inside the portafilter.
2. Turn the filter to the left or right to lock in place. This will help secure the filter in the
portafilter.
BEFORE THE FIRST USE
Before first use you should rinse the coffee maker with warm water as following:
1. Pull out the water tank of the coffee maker. Pour clean water into the tank, ensuring that the
water level should does not exceed the “MAX” mark and is no less than the “MIN” mark on the
side of the tank. When re-inserting the tank, angle forward slightly to allow the extraction tube to
fit into the tank, try to avoid direct pressure / stress onto the extraction tube from the sides of the
tank.
2. Insert the single or double cup filter into the Portafilter (see previous section), then position the
portafilter under the holder (see Fig.1) and turn it anticlockwise until it is fixed tightly (see Fig.2
and Fig.3).
Portafilter holder
Fig. 1
Fig. 2
Fig. 3
5