11
0800 422 274
NZ
Make sure your electrical voltage and circuit frequency correspond to those indicated
on the rating plate and your electrical system is sized for the maximum voltage on
the plate. This appliance requires a 10A fused, copper-wired electrical supply. A time
delay fuse or circuit breaker is recommended, as well as provision of a separate circuit
serving only this appliance. A power outlet should be located in an adjacent cabinet.
To connect the dishwasher, insert the plug into a properly earthed, easily accessible
electrical socket. If the socket is not appropriate for the plug, replace the socket rather
than use an adaptor or the like as such devices could cause overheating and burns.
WARNING!
•
Do not use an extension cord or an adaptor with this appliance.
•
Do not bend the power cord. Do not place the appliance on top of the cord.
• Do not modify the plug provided with this appliance. If it does not fit into your
power point, have a suitable outlet installed by a qualified electrician.
Earthing
This appliance must be earthed. In the event of a malfunction or breakdown, earthing
will reduce the risk of an electric shock by providing a path of least resistance for the
electric current. This appliance is equipped with a cord having an equipment-earthing
conductor and an earthing plug. The plug must be inserted into an outlet that is
installed and earthed in accordance with all local standards and requirements.
WARNING!
• Ensure the outlet is properly earthed to the ground. If unsure, consult a qualified
electrician or a service representative. Improper connection of the equipment
grounding conductor can result in the risk of an electric shock in case of malfunction.
• Do not, under any circumstances, cut or remove the third grounding prong from the
power plug.
After your new dishwasher has been installed, and before using it for the first time,
make sure to check the following points to ensure safe and efficient operation:
• Is the dishwasher level and properly installed?
• Is the water tap open?
• Are the hose connections secured tightly and there is no leakage at either end?
• Are all electrical cords tightly connected?
• Is the power switched on at the power point?
• Are the inlet and drain hoses free of knots and kinks?
• Has all packing material been removed from the dishwasher?
• Is all product documentation stored safely for easy access?
Installation (Cont.)
ELECTRICAL CONNECTION
BEFORE FIRST USE
