8
CHAPTER 3: Engineering Mode
3.2 ENGINEERING MODE OVERVIEW
MODE
FUNCTION
DESCRIPTION
ENG 0
Display Test
Start Key – LCD/LED on
Stop Key – LCD/LED off
Any Other Key - Will show on the display window.
Hold the STOP key for 3 seconds to return to the Engineering Menu.
ENG 1
Hardware Test
Motor & Incline Motor Test.
ENG 2
Auto Calibration
Auto calibrates the speed only.
ENG 3
Switch Function
Use the INCLINE or SPEED UP and DOWN keys to switch DEMO
MODE
off
or
on
(Demo on=1 & Demo off=0 on DISTANCE window).
Use the START key to select unit (1=KM & 0=Mile on TIME window).
ENG 4
Information
Accumulated Time and Distance
Press and hold the START key for 5 seconds to clear all data.
Remarks: Unit of Time is Hour.
Unit of Distance is KM or Mile based on your set.
SECOND LEVEL
ENG 8
Software Version
To Get to ENG 8 - Enter into ENG 3, the press and hold the SPEED UP
and INCLINE DOWN key at the same time for 3-5 seconds.
Press ENTER at P0 - Software version.
Press ENTER at P1 - Select speed up rate (normal or quick).
Press ENTER at P3 - Hold the START key to clear all data.
※
※
※
※
“START” key to save the change.
※
※
※
※
Demo off
-- console will display
Figure A
after remove the safety key;
Demo on
--60 seconds later after remove the
safety key, the console will enter into DEMO ON MODE. The LED and LCD will display in turns
(Figure B)
.
FIGURE A
FIGURE B
Содержание LS8.0T
Страница 1: ...1 LS8 0T Service Manual...
Страница 3: ...3 CHAPTER 1 Serial Number Location 1 1 1 Serial Number Location...
