Livestrong LS12.9E, Руководство пользователя

Страница: 12 / 40

12
BOLT (M)
SPRING WASHER (B)
FLAT WASHER (K)
WAVY WASHER (L)
PEDAL ARM
CRANK
PEDAL ARM WHEEL
GUIDE RAIL
CONSOLE MAST
PRE-INSTALLED BOLTS
CONSOLE CABLE
MAIN FRAME
assemBlY STEp 3
ALL
MODELS
a
open hardware bag 3 .
B
carefully pull the
console cable
through
the console mast using the twist tie located
inside the
console mast
.
c
gently slide the console mast onto the
main frame and attach console mast to
main frame using pre-installed bolts .
d
slide wavy washer (l) over crank
followed by
pedal arm
as shown. Rest
pedal arm wheel on guide rail .
e
attach the pedal arm to the crank using 1
flat washer (k) , 1 spring washer (b)
and 1 bolt (m) .
F
Repeat steps d–e on the opposite side of the
elliptical.
BOLT (M)
20 mm
Qty: 2 SPRING WASHER (B)
15 mm
Qty: 2 FLAT WASHER (K)
20 mm
Qty: 2 WAVY WASHER (L)
22.5 mm
Qty: 2
HARDWARE BAG 3 contents :
LS9.9E, LS12.9E SHOWN
note: Be
careful not
to pinch any
wires while
attaching the
console mast.