Fig.4a
5
OPERATING INSTRUCTING FOR THE AIR CONDITIONER
Before Starting This Unit
1) Select a suitable location, make sure you have easy access to an electrical outlet.
2) Install the Flexible Exhaust Hose and the Adjustable Window Slider Kit as depicted in Fig.4 &
Fig.4a
Fig.4
NOTE: Step 2 is required only while using the
cooling mode
.
3) Plug the unit into a 220-240V~50Hz/ or 115V~ 60Hz (Refer to the nameplate located on
the right side of the unit.) grounded electrical outlet.
DO NOT USE A REGULAR EXTENSION
CORD.
If it is necessary to use an extension cord with this unit, use an approved air conditioner
extension cord only.
4) Insert the power cord fixing strap into the hole in the back of the unit, and bundle up the excess
cord.
5) Make sure the
Water tank
is correctly positioned inside the cabinet otherwise the unit will not
operate.
6) Press the
POWER
button to turn on the unit.
Electrical Requirement
1. All wiring must comply with local and national electrical codes and be installed by a qualified
electrician. If you have any questions regarding the following instructions, contact a qualified
electrician.
2. Check available power supply and resolve any wiring problems BEFORE installation and
operation of this unit.
3. For your safety and protection, this unit is grounded through the power cord plug when
plugged into a matching wall outlet. If you are not sure whether the wall outlets in your
home are properly grounded, please consult a qualified electrician.
4. The manufacturers nameplate is located on the right side panel of the unit and contains
electrical and other technical data specific to this unit.
5. To avoid the possibility of personal injury, always disconnect the power supply to the unit
before installing and/or servicing.
Содержание LPAC12CRWGR
Страница 1: ......
