12 GB
sure to regulate the sensitivity
of the sensor over the course
of the year.
Setting the
daylight level
Turn the rotary control LUX
12
to increase the daylight level:
In the position, the motion
detector only reacts at night
(at approx. 10 lx). In the
position, the motion detector
also responds at daylight levels,
as long as about 20,000 lx
are not exceeded.
Aligning the
motion detector
Note:
Perform this adjustment at
twilight.
Slacken the locking screw
8
.
Turn the rotary control LUX
12
to position .
Align the motion detector
9
into the central region of the
desired coverage area.
Move about through the cover-
age area until you are satisfied
with the response characteris-
tics of the motion detector
9
.
To find the proper orientation,
change the position of the rotary
control SENS
10
or the orienta-
tion of the motion detector
9
.
Note:
Please note that the
motion detector
9
primarily
detects movements transverse
to the motion detector
9
. If
you move directly towards the
motion detector
9
, it cannot
detect this movement.
When you have aligned the
motion detector
9
satisfacto-
rily, re-tighten the fastening
screws
8
to fix the adjustment.
Turn the rotary control LUX
12
to the desired position. These
can be determined during the
dawn or twilight hours during
which the spotlight
1
should
respond.
Slowly turn the rotary control
LUX
12
clockwise until it reacts
to movement within the cover-
age area.
Содержание HG03444A
Страница 3: ...B 12 11 10 A 6 7 9 4 1 2 3 5 8...
Страница 4: ...2 5 m D C 13 14...
