LIVARNO LUX LSLB 30 A1, Инструкция по эксплуатации и правила безопасности

Страница: 5 / 70

LIVARNO LUX LSLB 30 A1
English - 3
1. Intended use
This LED emitter is not intended for commercial use. It is suitable for inside and outside use. The device
fulfils all relevant norms and standards relating to CE conformity. Any modifications to the LED emitter
other than recommended changes by the manufacturer may result in these standards no longer being met.
2. Package contents

LED emitter LIVARNO LUX LSLB 30 A1

Fitting materials (2 x screws and 2 x wall plugs)

Operating instructions with safety instructions
These operating instructions have a fold-out cover. On the inside of the cover is a diagram of the LED
emitter with the components numbered (figures
A to C ). The meanings of the numbers are as follows:
1 Twist joint
2 Pitch joint
3 Reflector
4 Sensor housing
5 Movement sensor
6 Screw
7 Mounting plate
8 Unlock button
9 Screw terminal
10 Power cable (not included in the package / domestic power lines)
11 TIME controller
12 SENS controller
13 LUX controller
14 Screw (2 units, for wall-mounting) - no picture -
15 Wall plug (2 units, for wall-mounting) - no picture -