LIVARNO LUX HG05693, Инструкции по эксплуатации и безопасности, Страница: 19 / 67

19 GB/IE
Remove exhausted batteries / rechargeable
batteries from the product immediately.
Start-up
LED Colour Changing Bulb
Before first use, screw the included lamp
1
into the E27 socket of a lighting fixture.
When doing this, ensure that the lamp
1
is
securely seated.
Note: Verify the lighting fixture or lamp
socket is disconnected from the mains be-
fore installing the product.
Note: The lamp
1
has a weight of approx.
48 g and measures approx. 60 x 116 mm.
Verify the size of the lamp
1
suitable with
the respective lighting fixture before use.
Connect the lamp
1
to the mains and
switch it on.
Remote control
Before first use, remove the battery insulat-
ing strip between the battery
16
and the
battery compartment
13
of the remote
control
2
.
Press the ON button
6
on the remote
control to switch the product on (Fig. A).
Note: Please note the remote control uses
infrared lamp: it does not allow the signal
to be transmitted “around the corner“ as
radio waves do. Light-tight objects may not
be located between the diode
14
and the
lamp
1
.
The lamp
1
will now light up white.
Operation
Select a light colour or different colour change
effects using the remote control
2
(Fig. A):
Selecting the light colour
Press one of the colour buttons
12
or the
W button
7
to select a light colour corre-
sponding with the button.
Press the button
3
to gradually increase
the brightness level.
Press the button
4
to gradually reduce
the brightness level.
There are 5 brightness level.