14 GB/IE
Check each bulb for damage immediately
after unpacking.
Replace defective bulbs with new ones immedi-
ately. Before replacing the bulb always remove
the mains plug from the socket.
Allow the lamp to cool for at least 15 minutes
before replacing a defective bulb.
Do not cover the lamp with objects. Fire can
result from excessive heat development.
Position the lamp so it is protected from moisture
and dirt.
Never leave the light unattended whilst in
operation. Excessive heat can result in a fire.
The LED light is not dimmable.
Do not look directly into the light source (lamp,
LED, etc.). Do not look into the light source
(lamp, LED, etc.) with an optical instrument
(e.g. magnifier).
Operation
Mounting the light
Remove the packaging materials.
Unscrew the threaded ring
1
from the socket
3
.
Place the lamp shade
2
on the socket
3
and
affix this by screwing the threaded ring
1
onto the socket
3
(see Fig. A).
Screw the light bulb
6
clockwise into the
socket (see Fig. B).
Your lamp is now ready for use (see Fig. C).
Using the lamp
Completely unwrap the power cord
5
.
Insert the mains plug
5
into the socket.
Turn the light on and off with the ON / OFF
switch
4
.
Inserting / Replacing the bulb
WARNING! RISK OF ELECTRIC
SHOCK!
Unplug the mains plug from
the socket.
CAUTION! RISK OF BURNS DUE
TO HOT SURFACES!
Allow the light
to cool down completely.
Turn the defective bulb carefully anticlockwise
out of the bulb socket.
Use a clean, lint-free cloth to replace a bulb.
Screw the lamp clockwise into the socket.
Please refer to the chapter “Technical data” to
see which bulbs are required for the respective
model.
Connect the mains plug
5
to the mains socket.
Maintenance and cleaning
WARNING! RISK OF ELECTRIC
SHOCK!
Remove the mains plug
5
from
the socket before you clean the lamp.
WARNING! RISK OF ELECTRIC
SHOCK!
For electrical safety reasons
do not clean the lamp with harsh deter-
gents and never immerse it in water.
CAUTION! RISK OF BURNS DUE
TO HOT SURFACES!
Allow the light
to cool down completely.
Do not use solvents such as petrol and the like,
as they could damage the lamp.
Only use a dry, lint-free cloth for cleaning.
Connect the mains plug
5
to the mains socket.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
339884_1910_livx_LED-Tischleuchte_content_OS.indd 14
339884_1910_livx_LED-Tischleuchte_content_OS.indd 14
12.03.20 13:14
12.03.20 13:14
