LIVARNO LUX 305977, Инструкция по сборке, эксплуатации и безопасности

Страница: 7 / 17

7 GB/IE/NI
Introduction / Safety … / … / Installing the … / Switching the light on / off / Maintenance and cleaning
are not suitable for all types of wall. Ask the re-
tailer about screws and wall plugs suitable for
the respective wall structure.
The manufacturer accepts no responsibility for
an inappropriate wall plug connection and any
resulting damage.
Always be attentive! Always pay attention to
what you are doing and use common sense.
Never use the light if you are having difficulty
concentrating or do not feel well.
Verify the installation site is suitable to bear the
weight of the lamp before installation.
Familiarise yourself with all instructions and
diagrams in this manual as well as with the light
itself before use.
Preparation
Required tools and materials
The tools and materials specified are not included.
This information and the values specified are bind-
ing and are provided as a reference. The nature of
the material is determined by the individual local
conditions.
- Pencil / marking tool
- Power drill
- Drill (approx. Ø 8 mm)
- Screwdriver
Installing the light
DANGER OF ELECTRIC
SHOCK!
Model 14133308L only:
Mark the drill holes along the vertical edge with
a space of approx. 30.8 cm between them and
along the horizontal edge with a space of approx.
24.5 cm between them.
Model 14133408L only:
Mark the drill holes along the vertical edge with
a space of approx. 34 cm between them and
along the horizontal edge with a space of
approx. 28.25 cm between them.
Both models:
Now drill the mounting holes. Be sure not to
damage the supply line.
Insert the wall plugs
1
into the drill holes.
Place the tooth lock washers
3
on the screws
4
with the edges facing upwards.
Use the screws
4
and wall plugs
1
to secure
the wall bracket
2
to the correct position and
location on the wall.
Ensure that the curved part of the wall bracket
2
is facing upwards and away from the wall.
Mount the light to the wall bracket
2
.
Insert the mains connection cable
7
of your
light into a properly installed socket.
Your light is now ready to use.
Switching the light on / off
Press the ON / OFF switch
5
on the outside
of the light.
When this is switched to ON, you can switch
the light on and off using the touch switch
6
on the mirror surface.
To deactivate the light, switch the ON / OFF
switch
5
on the outside of the light to OFF.
Maintenance and cleaning
DANGER OF ELECTRIC
SHOCK!
To clean the light, first disconnect it from the power
supply by removing the mains plug from the mains
socket.
To prevent burns, be sure the light is switched
off and cooled down before touching it.
Do not use solvents, petrol, etc. Otherwise the
light will be damaged.
Use a dry, lint-free cloth to clean the LED wall
mirror.
Reinsert the mains plug.