8 GB/IE/NI
Before installation
Note:
Remove all packaging materials from the
product.
Place the spotlight
1
on a stable substrate
with handle
2
.
Check the stability of the spotlight
1
.
Align the spot into the desired direction. For
this, you may need to slacken the screw of the
hinge joint
3
. After alignment, tighten the
screw of the hinge joint
3
again, to ensure a
secure hold of the spotlight
1
.
Use
Plug the plug
4
into the socket.
Switch on the product with switch
5
.
Note:
-
Insert the plug to the corresponding IPX4
socket only during outdoor use.
- or the plug should be for indoor use if no
corresponding IPX4 socket can be found.
Connect the plug into
the socket of spotlight
Open the socket cover
6
behind the
product.
Connect an additional item by plugging it into
the socket of the spotlight
7
(see Fig.).
Close the socket cover
6
(For HG02985-BS).
For HG02985-BS, lock with interlock
8
.
Note:
Make sure the addition item with
water proof plug.
Note:
Do not connect any appliance with a
total output of > 2500 W. Otherwise there is
the risk of a fire.
For HG02985 / HG02985-FR:
The socket of spotlight is only IPX4 protected.
Insert only corresponding IPX4 plug only for
outdoor use.
RISK OF ELECTRIC SHOCK!
Water may
enter the product if incorrect plug is used
For HG02985-BS:
The socket is only IPX4 protected.
The socket can only protected from water when
the cover is completely closed.
Water may enter the product if the cover is not
corrected posited.
Cleaning and Care
Never immerse the product in water or other
liquids. Otherwise the product can be
damaged.
Remove the plug
4
from the socket
7
and
allow the product to cool down.
Clean the product with a lint-free, slightly moist
cloth and mild cleaning agent.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics / 20–22: paper and fibre-
board / 80–98: composite materials.
The product and packaging materials
are recyclable, dispose of it separately
for better waste treatment. The Triman
logo is valid in France only.
Contact your local refuse disposal
authority for more details of how to dis-
pose of your worn-out product.
To help protect the environment, please
dispose of the product properly when it
has reached the end of its useful life and
not in the household waste. Information
on collection points and their opening
