20 GB/IE
Switching off
When switching the lamp
1
off, using the
OFF button
5
on the remote control
2
.
When switching the lamp
1
on, using the
ON button
6
, the last colour or the last se-
lected colour changing mode will be resumed.
However, if the power supply of the lamp
1
was disconnected, for example, switch off
by electrical / mechanical switch, or take
out the lamp from the lamp socket, etc.
Then, even the power resume and switch on
the lamp
1
again by remote control
2
, it
will only light up in white color at medium
bright level.
Changing the battery
Change the battery
16
when the range of
the remote control
2
noticeably decreases
or the lamp
1
no longer responds to the
remote control
2
being operated.
To do so, proceed as shown in Figure B.
Only use a battery type CR2025 and note
the correct polarity when inserting the
battery. This is shown on the back of the
remote control
2
.
Cleaning and Care
DANGER OF ELECTRIC
SHOCK!
For electrical safety, never clean the
product with water or other liquids, or immerse
it in water.
Remove the lamp
1
from the lighting fix-
ture or lamp socket before cleaning it. When
doing so, please follow the instructions of
the lighting fixture being used.
Clean the lamp
1
and the remote
control
2
with a dry, lint-free cloth.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the packag-
ing materials for waste separation,
which are marked with abbreviations
(a) and numbers (b) with following
meaning: 1–7: plastics / 20–22:
paper and fibreboard / 80–98:
composite materials.
