LIVARNO LUX 14131008L, Инструкция по сборке, эксплуатации и безопасности

Страница: 22 / 24

22 GB
Maintenance and Cleaning / Disposal / Warranty and Service
Do not look into the LED from a close distance
during operation.
Do not look into the LED with an optical instrument
(e.g. magnifier).
In order to disconnect the lamp completely
from the power supply, the mains plug must be
removed from the socket.
14131008L:
The fixed LED module is not replaceable. If the
LED module is damaged, please dispose of the
light.
Start-up
Assembly
14131102L:
Use the suction cup
9
included to insert the
light bulb
8
.
Carefully press the suction cup
9
onto the
light bulb
8
to do so.
Insert the light bulb into the socket carefully
and tighten it with a 1/4 turn clockwise.
Ensure that it is positioned correctly.
Switching the light on / off
Plug the mains plug
10
into a properly installed
socket.
Switch the lamp on or off using the ON / OFF
switch
4
.
Adjusting the reflector
or spotlight
Note: only adjust the reflector
1
or the spotlight
7
with the light switched off.
Allow the light to cool off completely.
14131008L:
Bring the lamp arm
3
into the desired position.
Angle the reflector
1
to the desired angle
using the adjustment lever
2
.
14131102L:
Bring the lamp arm
3
into the desired position.
Adjust the spotlight
7
to the desired position.
Replacing the bulb (14131102L)
RISK OF ELECTRIC SHOCK!
First unplug the mains plug
10
from the socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
Use the included suction cup
9
to change the
bulb
8
. Carefully press the suction cup
9
onto the bulb
8
to do so.
Remove the bulb
8
by unscrewing it from the
socket with a 1/4 turn counter-clockwise.
Only use the light bulbs specified in chapter
“Technical Data”.
Carefully press the suction cup
9
onto the
light bulb
8
.
Insert the light bulb into the socket carefully
and tighten it with a 1/4 turn clockwise. Ensure
that it is positioned correctly.
Plug the mains plug
10
into the socket again.
Maintenance and Cleaning
Note: The device is maintenance-free. LEDS are
not replaceable.
RISK OF ELECTRIC SHOCK!
First remove the mains plug from the socket.
CAUTION! RISK OF BURNS DUE TO
HOT SURFACES!
Allow the lamp to cool down completely.
RISK OF ELECTRIC SHOCK!
For electrical safety, never clean the light with
water or other liquids, or immerse it in water.
Safety / Start-up / Replacing the bulb / Maintenance and Cleaning